Praxis MTN Wave 1x Chainring – 104BCD

Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminum and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.

Specifications:

• 104 BCD | 30T – 36T | 7075-T6
• Wave™ Tech tooth profile
• 10/11/12sp Shimano/KMC/SRAM
• Stamped and machined manufacturing with hard black anodizing for durability
• 30T NOTE: is a threaded and needs M8 bolt with min 7.5mm length threads
• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2
• In very rough terrain, or just for pure security, we still recommend use of an upper guide

Compatibility:

• Will mount to most any 4-arm 104BCD MTB crank
• 30T is a threaded ring and needs M8 male bolt with min 7.5mm length for interface
• RD- Must use with Mid or Long cage ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2
• In very rough terrain, or just for pure security, we still recommend use of an upper guide