Enve G Series Alloy Dropper Post

The ENVE G Series Alloy Dropper Post, which allows 40mm of drop, is designed to lower your centre of gravity for improved confidence and control when riding off road with drop bars.

Intended for use while both riding and racing, the dropper post can be trimmed by up to 130mm to cut 50g of weight, due to its high cartridge placement and inverted design. These improvements not only enhance the dropper post’s ability to shed mud and grit thrown up by your wheels, but also create space for a saddlebag and a more reliable cartridge mechanism.

Easily serviceable without tools and compatible with internally routed frames, the ENVE G Series Alloy Dropper Post has a baseline diameter of 27.2mm but comes with two shims to allow it to fit a wider seat tube. Also suited to XC riding and racing, this light dropper post, designed to be operated using the ENVE G Series Drop Bar Dual Action Dropper Lever, will enhance your control and bike handling.

Key features:

• Length 350mm, diameter 27.2mm
• Offers 40mm of drop
• Up to 130mm of trim for weight savings
• Inverted to shed debris and allow space for saddlebag
• Low stack height
• Cable actuated
• Bolt clamp design
• Weight 395g, or 345g with maximum trim
• Includes shims for 30.9mm and 31.6mm posts
• Compatible with internally routed frames only
• Compatible with most dropper post remote levers
• Maximum stack height 210mm, minimum 145mm
• 5-year Factory Limited Warranty, cover through ENVE’s Incidental Damage Protection Programme